www.LinuxHowtos.org
DEVLINK\-PORT
Section: Linux (8)Updated: 14 Mar 2016
Index Return to Main Contents
NAME
devlink-port - devlink port configurationSYNOPSIS
devlink
[ OPTIONS ]
port
{ COMMAND |
help }
OPTIONS := {
-V[ersion] |
-n[no-nice-names] }
devlink port set
DEV/PORT_INDEX
[
type { eth | ib | auto }
]
devlink port split
DEV/PORT_INDEX
count
COUNT
devlink port unsplit
DEV/PORT_INDEX
devlink port show
[ DEV/PORT_INDEX ]
devlink port help
DESCRIPTION
devlink port set - change devlink port attributes
DEV/PORT_INDEX - specifies the devlink port to operate on.
Format is: BUS_NAME/BUS_ADDRESS/PORT_INDEX
- type { eth | ib | auto }
-
set port type
eth - Ethernet
ib - Infiniband
auto - autoselect
devlink port split - split devlink port into more
DEV/PORT_INDEX - specifies the devlink port to operate on.
- count COUNT
-
number of ports to split to.
devlink port unsplit - unsplit previously split devlink port
Could be performed on any split port of the same split group.
DEV/PORT_INDEX - specifies the devlink port to operate on.
devlink port show - display devlink port attributes
DEV/PORT_INDEX - specifies the devlink port to show. If this argument is omitted all ports are listed.
EXAMPLES
devlink port show
- Shows the state of all devlink ports on the system.
devlink port show pci/0000:01:00.0/1
- Shows the state of specified devlink port.
devlink port set pci/0000:01:00.0/1 type eth
- Set type of specified devlink port to Ethernet.
devlink port split pci/0000:01:00.0/1 count 4
- Split the specified devlink port into four ports.
devlink port unsplit pci/0000:01:00.0/1
-
Unplit the specified previously split devlink port.
SEE ALSO
devlink(8), devlink-dev(8), devlink-sb(8), devlink-monitor(8),AUTHOR
Jiri Pirko <jiri@mellanox.com>