www.LinuxHowtos.org
ZMQ_GETSOCKOPT
Section: 0MQ Manual (3)Updated: 12/31/2016
Index Return to Main Contents
NAME
zmq_getsockopt - get 0MQ socket optionsSYNOPSIS
int zmq_getsockopt (void *socket, int option_name, void *option_value, size_t *option_len);
DESCRIPTION
The zmq_getsockopt() function shall retrieve the value for the option specified by the option_name argument for the 0MQ socket pointed to by the socket argument, and store it in the buffer pointed to by the option_value argument. The option_len argument is the size in bytes of the buffer pointed to by option_value; upon successful completion zmq_getsockopt() shall modify the option_len argument to indicate the actual size of the option value stored in the buffer.
The following options can be retrieved with the zmq_getsockopt() function:
ZMQ_AFFINITY: Retrieve I/O thread affinity
The ZMQ_AFFINITY option shall retrieve the I/O thread affinity for newly created connections on the specified socket.
Affinity determines which threads from the 0MQ I/O thread pool associated with the socketcqs context shall handle newly created connections. A value of zero specifies no affinity, meaning that work shall be distributed fairly among all 0MQ I/O threads in the thread pool. For non-zero values, the lowest bit corresponds to thread 1, second lowest bit to thread 2 and so on. For example, a value of 3 specifies that subsequent connections on socket shall be handled exclusively by I/O threads 1 and 2.
See also zmq_init(3) for details on allocating the number of I/O threads for a specific context.
|
Option value type |
uint64_t
|
|
Option value unit |
N/A (bitmap)
|
|
Default value |
0
|
|
Applicable socket types |
N/A
|
ZMQ_BACKLOG: Retrieve maximum length of the queue of outstanding connections
The ZMQ_BACKLOG option shall retrieve the maximum length of the queue of outstanding peer connections for the specified socket; this only applies to connection-oriented transports. For details refer to your operating system documentation for the listen function.
|
Option value type |
int
|
|
Option value unit |
connections
|
|
Default value |
100
|
|
Applicable socket types |
all, only for connection-oriented transports
|
ZMQ_CONNECT_TIMEOUT: Retrieve connect() timeout
Retrieves how long to wait before timing-out a connect() system call. The connect() system call normally takes a long time before it returns a time out error. Setting this option allows the library to time out the call at an earlier interval.
|
Option value type |
int
|
|
Option value unit |
milliseconds
|
|
Default value |
0 (disabled)
|
|
Applicable socket types |
all, when using TCP transports.
|
ZMQ_CURVE_PUBLICKEY: Retrieve current CURVE public key
Retrieves the current long term public key for the socket. You can provide either a 32 byte buffer, to retrieve the binary key value, or a 41 byte buffer, to retrieve the key in a printable Z85 format. NOTE: to fetch a printable key, the buffer must be 41 bytes large to hold the 40-char key value and one null byte.
|
Option value type |
binary data or Z85 text string
|
|
Option value size |
32 or 41
|
|
Default value |
null
|
|
Applicable socket types |
all, when using TCP transport
|
ZMQ_CURVE_SECRETKEY: Retrieve current CURVE secret key
Retrieves the current long term secret key for the socket. You can provide either a 32 byte buffer, to retrieve the binary key value, or a 41 byte buffer, to retrieve the key in a printable Z85 format. NOTE: to fetch a printable key, the buffer must be 41 bytes large to hold the 40-char key value and one null byte.
|
Option value type |
binary data or Z85 text string
|
|
Option value size |
32 or 41
|
|
Default value |
null
|
|
Applicable socket types |
all, when using TCP transport
|
ZMQ_CURVE_SERVERKEY: Retrieve current CURVE server key
Retrieves the current server key for the client socket. You can provide either a 32 byte buffer, to retrieve the binary key value, or a 41-byte buffer, to retrieve the key in a printable Z85 format. NOTE: to fetch a printable key, the buffer must be 41 bytes large to hold the 40-char key value and one null byte.
|
Option value type |
binary data or Z85 text string
|
|
Option value size |
32 or 41
|
|
Default value |
null
|
|
Applicable socket types |
all, when using TCP transport
|
ZMQ_EVENTS: Retrieve socket event state
The ZMQ_EVENTS option shall retrieve the event state for the specified socket. The returned value is a bit mask constructed by ORcqing a combination of the following event flags:
ZMQ_POLLIN
- Indicates that at least one message may be received from the specified socket without blocking.
ZMQ_POLLOUT
- Indicates that at least one message may be sent to the specified socket without blocking.
The combination of a file descriptor returned by the ZMQ_FD option being ready for reading but no actual events returned by a subsequent retrieval of the ZMQ_EVENTS option is valid; applications should simply ignore this case and restart their polling operation/event loop.
|
Option value type |
int
|
|
Option value unit |
N/A (flags)
|
|
Default value |
N/A
|
|
Applicable socket types |
all
|
ZMQ_FD: Retrieve file descriptor associated with the socket
The ZMQ_FD option shall retrieve the file descriptor associated with the specified socket. The returned file descriptor can be used to integrate the socket into an existing event loop; the 0MQ library shall signal any pending events on the socket in an edge-triggered fashion by making the file descriptor become ready for reading.
-
Note
The ability to read from the returned file descriptor does not necessarily indicate that messages are available to be read from, or can be written to, the underlying socket; applications must retrieve the actual event state with a subsequent retrieval of the ZMQ_EVENTS option.
-
Note
The returned file descriptor is also used internally by the zmq_send and zmq_recv functions. As the descriptor is edge triggered, applications must update the state of ZMQ_EVENTS after each invocation of zmq_send or zmq_recv.To be more explicit: after calling zmq_send the socket may become readable (and vice versa) without triggering a read event on the file descriptor.
-
Caution
The returned file descriptor is intended for use with a poll or similar system call only. Applications must never attempt to read or write data to it directly, neither should they try to close it.
|
Option value type |
int on POSIX systems, SOCKET on Windows
|
|
Option value unit |
N/A
|
|
Default value |
N/A
|
|
Applicable socket types |
all
|
ZMQ_GSSAPI_PLAINTEXT: Retrieve GSSAPI plaintext or encrypted status
Returns the ZMQ_GSSAPI_PLAINTEXT option, if any, previously set on the socket. A value of 1 means that communications will be plaintext. A value of 0 means communications will be encrypted.
|
Option value type |
int
|
|
Option value unit |
0, 1
|
|
Default value |
0 (false)
|
|
Applicable socket types |
all, when using TCP or IPC transports
|
ZMQ_GSSAPI_PRINCIPAL: Retrieve the name of the GSSAPI principal
The ZMQ_GSSAPI_PRINCIPAL option shall retrieve the principal name set for the GSSAPI security mechanism. The returned value shall be a NULL-terminated string and MAY be empty. The returned size SHALL include the terminating null byte.
|
Option value type |
NULL-terminated character string
|
|
Option value unit |
N/A
|
|
Default value |
null string
|
|
Applicable socket types |
all, when using TCP or IPC transports
|
ZMQ_GSSAPI_SERVER: Retrieve current GSSAPI server role
Returns the ZMQ_GSSAPI_SERVER option, if any, previously set on the socket.
|
Option value type |
int
|
|
Option value unit |
0, 1
|
|
Default value |
0 (false)
|
|
Applicable socket types |
all, when using TCP or IPC transports
|
ZMQ_GSSAPI_SERVICE_PRINCIPAL: Retrieve the name of the GSSAPI service principal
The ZMQ_GSSAPI_SERVICE_PRINCIPAL option shall retrieve the principal name of the GSSAPI server to which a GSSAPI client socket intends to connect. The returned value shall be a NULL-terminated string and MAY be empty. The returned size SHALL include the terminating null byte.
|
Option value type |
NULL-terminated character string
|
|
Option value unit |
N/A
|
|
Default value |
null string
|
|
Applicable socket types |
all, when using TCP or IPC transports
|
ZMQ_HANDSHAKE_IVL: Retrieve maximum handshake interval
The ZMQ_HANDSHAKE_IVL option shall retrieve the maximum handshake interval for the specified socket. Handshaking is the exchange of socket configuration information (socket type, identity, security) that occurs when a connection is first opened, only for connection-oriented transports. If handshaking does not complete within the configured time, the connection shall be closed. The value 0 means no handshake time limit.
|
Option value type |
int
|
|
Option value unit |
milliseconds
|
|
Default value |
30000
|
|
Applicable socket types |
all but ZMQ_STREAM, only for connection-oriented transports
|
ZMQ_IDENTITY: Retrieve socket identity
The ZMQ_IDENTITY option shall retrieve the identity of the specified socket. Socket identity is used only by request/reply pattern. Namely, it can be used in tandem with ROUTER socket to route messages to the peer with specific identity.
Identity should be at least one byte and at most 255 bytes long. Identities starting with binary zero are reserved for use by 0MQ infrastructure.
|
Option value type |
binary data
|
|
Option value unit |
N/A
|
|
Default value |
NULL
|
|
Applicable socket types |
ZMQ_REP, ZMQ_REQ, ZMQ_ROUTER, ZMQ_DEALER.
|
ZMQ_IMMEDIATE: Retrieve attach-on-connect value
Retrieve the state of the attach on connect value. If set to 1, will delay the attachment of a pipe on connect until the underlying connection has completed. This will cause the socket to block if there are no other connections, but will prevent queues from filling on pipes awaiting connection.
|
Option value type |
int
|
|
Option value unit |
boolean
|
|
Default value |
0 (false)
|
|
Applicable socket types |
all, primarily when using TCP/IPC transports.
|
ZMQ_INVERT_MATCHING: Retrieve inverted filtering status
Returns the value of the ZMQ_INVERT_MATCHING option. A value of 1 means the socket uses inverted prefix matching.
On PUB and XPUB sockets, this causes messages to be sent to all connected sockets except those subscribed to a prefix that matches the message. On SUB sockets, this causes only incoming messages that do not match any of the socketcqs subscriptions to be received by the user.
Whenever ZMQ_INVERT_MATCHING is set to 1 on a PUB socket, all SUB sockets connecting to it must also have the option set to 1. Failure to do so will have the SUB sockets reject everything the PUB socket sends them. XSUB sockets do not need to do this because they do not filter incoming messages.
|
Option value type |
int
|
|
Option value unit |
0,1
|
|
Default value |
0
|
|
Applicable socket types |
ZMQ_PUB, ZMQ_XPUB, ZMQ_SUB
|
ZMQ_IPV4ONLY: Retrieve IPv4-only socket override status
Retrieve the IPv4-only option for the socket. This option is deprecated. Please use the ZMQ_IPV6 option.
|
Option value type |
int
|
|
Option value unit |
boolean
|
|
Default value |
1 (true)
|
|
Applicable socket types |
all, when using TCP transports.
|
ZMQ_IPV6: Retrieve IPv6 socket status
Retrieve the IPv6 option for the socket. A value of 1 means IPv6 is enabled on the socket, while 0 means the socket will use only IPv4. When IPv6 is enabled the socket will connect to, or accept connections from, both IPv4 and IPv6 hosts.
|
Option value type |
int
|
|
Option value unit |
boolean
|
|
Default value |
0 (false)
|
|
Applicable socket types |
all, when using TCP transports.
|
ZMQ_LAST_ENDPOINT: Retrieve the last endpoint set
The ZMQ_LAST_ENDPOINT option shall retrieve the last endpoint bound for TCP and IPC transports. The returned value will be a string in the form of a ZMQ DSN. Note that if the TCP host is INADDR_ANY, indicated by a *, then the returned address will be 0.0.0.0 (for IPv4).
|
Option value type |
NULL-terminated character string
|
|
Option value unit |
N/A
|
|
Default value |
NULL
|
|
Applicable socket types |
all, when binding TCP or IPC transports
|
ZMQ_LINGER: Retrieve linger period for socket shutdown
The ZMQ_LINGER option shall retrieve the linger period for the specified socket. The linger period determines how long pending messages which have yet to be sent to a peer shall linger in memory after a socket is closed with zmq_close(3), and further affects the termination of the socketcqs context with zmq_ctx_term(3). The following outlines the different behaviours:
- * The default value of -1 specifies an infinite linger period. Pending messages shall not be discarded after a call to zmq_close(); attempting to terminate the socketcqs context with zmq_ctx_term() shall block until all pending messages have been sent to a peer.
- * The value of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed with zmq_close().
-
*
Positive values specify an upper bound for the linger period in milliseconds. Pending messages shall not be discarded after a call to
zmq_close(); attempting to terminate the socketcqs context with
zmq_ctx_term()
shall block until either all pending messages have been sent to a peer, or the linger period expires, after which any pending messages shall be discarded.
Option value type int Option value unit milliseconds Default value -1 (infinite) Applicable socket types all
ZMQ_MAXMSGSIZE: Maximum acceptable inbound message size
The option shall retrieve limit for the inbound messages. If a peer sends a message larger than ZMQ_MAXMSGSIZE it is disconnected. Value of -1 means no limit.
|
Option value type |
int64_t
|
|
Option value unit |
bytes
|
|
Default value |
-1
|
|
Applicable socket types |
all
|
ZMQ_MECHANISM: Retrieve current security mechanism
The ZMQ_MECHANISM option shall retrieve the current security mechanism for the socket.
|
Option value type |
int
|
|
Option value unit |
ZMQ_NULL, ZMQ_PLAIN, ZMQ_CURVE, or ZMQ_GSSAPI
|
|
Default value |
ZMQ_NULL
|
|
Applicable socket types |
all, when using TCP or IPC transports
|
ZMQ_MULTICAST_HOPS: Maximum network hops for multicast packets
The option shall retrieve time-to-live used for outbound multicast packets. The default of 1 means that the multicast packets doncqt leave the local network.
|
Option value type |
int
|
|
Option value unit |
network hops
|
|
Default value |
1
|
|
Applicable socket types |
all, when using multicast transports
|
ZMQ_MULTICAST_MAXTPDU: Maximum transport data unit size for multicast packets
The ZMQ_MULTICAST_MAXTPDU option shall retrieve the maximum transport data unit size used for outbound multicast packets.
This must be set at or below the minimum Maximum Transmission Unit (MTU) for all network paths over which multicast reception is required.
|
Option value type |
int
|
|
Option value unit |
bytes
|
|
Default value |
1500
|
|
Applicable socket types |
all, when using multicast transports
|
ZMQ_PLAIN_PASSWORD: Retrieve current password
The ZMQ_PLAIN_PASSWORD option shall retrieve the last password set for the PLAIN security mechanism. The returned value shall be a NULL-terminated string and MAY be empty. The returned size SHALL include the terminating null byte.
|
Option value type |
NULL-terminated character string
|
|
Option value unit |
N/A
|
|
Default value |
null string
|
|
Applicable socket types |
all, when using TCP or IPC transports
|
ZMQ_PLAIN_SERVER: Retrieve current PLAIN server role
Returns the ZMQ_PLAIN_SERVER option, if any, previously set on the socket.
|
Option value type |
int
|
|
Option value unit |
0, 1
|
|
Default value |
int
|
|
Applicable socket types |
all, when using TCP or IPC transports
|
ZMQ_PLAIN_USERNAME: Retrieve current PLAIN username
The ZMQ_PLAIN_USERNAME option shall retrieve the last username set for the PLAIN security mechanism. The returned value shall be a NULL-terminated string and MAY be empty. The returned size SHALL include the terminating null byte.
|
Option value type |
NULL-terminated character string
|
|
Option value unit |
N/A
|
|
Default value |
null string
|
|
Applicable socket types |
all, when using TCP or IPC transports
|
ZMQ_USE_FD: Retrieve the pre-allocated socket file descriptor
The ZMQ_USE_FD option shall retrieve the pre-allocated file descriptor that has been assigned to a ZMQ socket, if any. -1 shall be returned if a pre-allocated file descriptor was not set for the socket.
|
Option value type |
int
|
|
Option value unit |
file descriptor
|
|
Default value |
-1
|
|
Applicable socket types |
all bound sockets, when using IPC or TCP transport
|
ZMQ_RATE: Retrieve multicast data rate
The ZMQ_RATE option shall retrieve the maximum send or receive data rate for multicast transports using the specified socket.
|
Option value type |
int
|
|
Option value unit |
kilobits per second
|
|
Default value |
100
|
|
Applicable socket types |
all, when using multicast transports
|
ZMQ_RCVBUF: Retrieve kernel receive buffer size
The ZMQ_RCVBUF option shall retrieve the underlying kernel receive buffer size for the specified socket. For details refer to your operating system documentation for the SO_RCVBUF socket option.
|
Option value type |
int
|
|
Option value unit |
bytes
|
|
Default value |
8192
|
|
Applicable socket types |
all
|
ZMQ_RCVHWM: Retrieve high water mark for inbound messages
The ZMQ_RCVHWM option shall return the high water mark for inbound messages on the specified socket. The high water mark is a hard limit on the maximum number of outstanding messages 0MQ shall queue in memory for any single peer that the specified socket is communicating with. A value of zero means no limit.
If this limit has been reached the socket shall enter an exceptional state and depending on the socket type, 0MQ shall take appropriate action such as blocking or dropping sent messages. Refer to the individual socket descriptions in zmq_socket(3) for details on the exact action taken for each socket type.
|
Option value type |
int
|
|
Option value unit |
messages
|
|
Default value |
1000
|
|
Applicable socket types |
all
|
ZMQ_RCVMORE: More message data parts to follow
The ZMQ_RCVMORE option shall return True (1) if the message part last received from the socket was a data part with more parts to follow. If there are no data parts to follow, this option shall return False (0).
Refer to zmq_send(3) and zmq_recv(3) for a detailed description of multi-part messages.
|
Option value type |
int
|
|
Option value unit |
boolean
|
|
Default value |
N/A
|
|
Applicable socket types |
all
|
ZMQ_RCVTIMEO: Maximum time before a socket operation returns with EAGAIN
Retrieve the timeout for recv operation on the socket. If the value is 0, zmq_recv(3) will return immediately, with a EAGAIN error if there is no message to receive. If the value is -1, it will block until a message is available. For all other values, it will wait for a message for that amount of time before returning with an EAGAIN error.
|
Option value type |
int
|
|
Option value unit |
milliseconds
|
|
Default value |
-1 (infinite)
|
|
Applicable socket types |
all
|
ZMQ_RECONNECT_IVL: Retrieve reconnection interval
The ZMQ_RECONNECT_IVL option shall retrieve the initial reconnection interval for the specified socket. The reconnection interval is the period 0MQ shall wait between attempts to reconnect disconnected peers when using connection-oriented transports. The value -1 means no reconnection.
-
Note
The reconnection interval may be randomized by 0MQ to prevent reconnection storms in topologies with a large number of peers per socket.
|
Option value type |
int
|
|
Option value unit |
milliseconds
|
|
Default value |
100
|
|
Applicable socket types |
all, only for connection-oriented transports
|
ZMQ_RECONNECT_IVL_MAX: Retrieve maximum reconnection interval
The ZMQ_RECONNECT_IVL_MAX option shall retrieve the maximum reconnection interval for the specified socket. This is the maximum period 0MQ shall wait between attempts to reconnect. On each reconnect attempt, the previous interval shall be doubled untill ZMQ_RECONNECT_IVL_MAX is reached. This allows for exponential backoff strategy. Default value means no exponential backoff is performed and reconnect interval calculations are only based on ZMQ_RECONNECT_IVL.
-
Note
Values less than ZMQ_RECONNECT_IVL will be ignored.
|
Option value type |
int
|
|
Option value unit |
milliseconds
|
|
Default value |
0 (only use ZMQ_RECONNECT_IVL)
|
|
Applicable socket types |
all, only for connection-oriented transport
|
ZMQ_RECOVERY_IVL: Get multicast recovery interval
The ZMQ_RECOVERY_IVL option shall retrieve the recovery interval for multicast transports using the specified socket. The recovery interval determines the maximum time in milliseconds that a receiver can be absent from a multicast group before unrecoverable data loss will occur.
|
Option value type |
int
|
|
Option value unit |
milliseconds
|
|
Default value |
10000
|
|
Applicable socket types |
all, when using multicast transports
|
ZMQ_SNDBUF: Retrieve kernel transmit buffer size
The ZMQ_SNDBUF option shall retrieve the underlying kernel transmit buffer size for the specified socket. For details refer to your operating system documentation for the SO_SNDBUF socket option.
|
Option value type |
int
|
|
Option value unit |
bytes
|
|
Default value |
8192
|
|
Applicable socket types |
all
|
ZMQ_SNDHWM: Retrieves high water mark for outbound messages
The ZMQ_SNDHWM option shall return the high water mark for outbound messages on the specified socket. The high water mark is a hard limit on the maximum number of outstanding messages 0MQ shall queue in memory for any single peer that the specified socket is communicating with. A value of zero means no limit.
If this limit has been reached the socket shall enter an exceptional state and depending on the socket type, 0MQ shall take appropriate action such as blocking or dropping sent messages. Refer to the individual socket descriptions in zmq_socket(3) for details on the exact action taken for each socket type.
|
Option value type |
int
|
|
Option value unit |
messages
|
|
Default value |
1000
|
|
Applicable socket types |
all
|
ZMQ_SNDTIMEO: Maximum time before a socket operation returns with EAGAIN
Retrieve the timeout for send operation on the socket. If the value is 0, zmq_send(3) will return immediately, with a EAGAIN error if the message cannot be sent. If the value is -1, it will block until the message is sent. For all other values, it will try to send the message for that amount of time before returning with an EAGAIN error.
|
Option value type |
int
|
|
Option value unit |
milliseconds
|
|
Default value |
-1 (infinite)
|
|
Applicable socket types |
all
|
ZMQ_SOCKS_PROXY: Retrieve SOCKS5 proxy address
The ZMQ_SOCKS_PROXY option shall retrieve the SOCKS5 proxy address in string format. The returned value shall be a NULL-terminated string and MAY be empty. The returned size SHALL include the terminating null byte.
|
Option value type |
NULL-terminated character string
|
|
Option value unit |
N/A
|
|
Default value |
null string
|
|
Applicable socket types |
all, when using TCP transports
|
ZMQ_TCP_KEEPALIVE: Override SO_KEEPALIVE socket option
Override SO_KEEPALIVE socket option(where supported by OS). The default value of -1 means to skip any overrides and leave it to OS default.
|
Option value type |
int
|
|
Option value unit |
-1,0,1
|
|
Default value |
-1 (leave to OS default)
|
|
Applicable socket types |
all, when using TCP transports.
|
ZMQ_TCP_KEEPALIVE_CNT: Override TCP_KEEPCNT socket option
Override TCP_KEEPCNT socket option(where supported by OS). The default value of -1 means to skip any overrides and leave it to OS default.
|
Option value type |
int
|
|
Option value unit |
-1,>0
|
|
Default value |
-1 (leave to OS default)
|
|
Applicable socket types |
all, when using TCP transports.
|
ZMQ_TCP_KEEPALIVE_IDLE: Override TCP_KEEPIDLE (or TCP_KEEPALIVE on some OS)
Override TCP_KEEPIDLE(or TCP_KEEPALIVE on some OS) socket option (where supported by OS). The default value of -1 means to skip any overrides and leave it to OS default.
|
Option value type |
int
|
|
Option value unit |
-1,>0
|
|
Default value |
-1 (leave to OS default)
|
|
Applicable socket types |
all, when using TCP transports.
|
ZMQ_TCP_KEEPALIVE_INTVL: Override TCP_KEEPINTVL socket option
Override TCP_KEEPINTVL socket option(where supported by OS). The default value of -1 means to skip any overrides and leave it to OS default.
|
Option value type |
int
|
|
Option value unit |
-1,>0
|
|
Default value |
-1 (leave to OS default)
|
|
Applicable socket types |
all, when using TCP transports.
|
ZMQ_TCP_MAXRT: Retrieve Max TCP Retransmit Timeout
On OSes where it is supported, retrieves how long before an unacknowledged TCP retransmit times out. The system normally attempts many TCP retransmits following an exponential backoff strategy. This means that after a network outage, it may take a long time before the session can be re-established. Setting this option allows the timeout to happen at a shorter interval.
|
Option value type |
int
|
|
Option value unit |
milliseconds
|
|
Default value |
0 (leave to OS default)
|
|
Applicable socket types |
all, when using TCP transports.
|
ZMQ_THREAD_SAFE: Retrieve socket thread safety
The ZMQ_THREAD_SAFE option shall retrieve a boolean value indicating whether or not the socket is threadsafe. Currently ZMQ_CLIENT and ZMQ_SERVER sockets are threadsafe.
|
Option value type |
boolean
|
|
Applicable socket types |
all
|
ZMQ_TOS: Retrieve the Type-of-Service socket override status
Retrieve the IP_TOS option for the socket.
|
Option value type |
int
|
|
Option value unit |
>0
|
|
Default value |
0
|
|
Applicable socket types |
all, only for connection-oriented transports
|
ZMQ_TYPE: Retrieve socket type
The ZMQ_TYPE option shall retrieve the socket type for the specified socket. The socket type is specified at socket creation time and cannot be modified afterwards.
|
Option value type |
int
|
|
Option value unit |
N/A
|
|
Default value |
N/A
|
|
Applicable socket types |
all
|
ZMQ_ZAP_DOMAIN: Retrieve RFC 27 authentication domain
The ZMQ_ZAP_DOMAIN option shall retrieve the last ZAP domain set for the socket. The returned value shall be a NULL-terminated string and MAY be empty. The returned size SHALL include the terminating null byte.
|
Option value type |
character string
|
|
Option value unit |
N/A
|
|
Default value |
not set
|
|
Applicable socket types |
all, when using TCP transport
|
ZMQ_VMCI_BUFFER_SIZE: Retrieve buffer size of the VMCI socket
The ZMQ_VMCI_BUFFER_SIZE option shall retrieve the size of the underlying buffer for the socket. Used during negotiation before the connection is established.
|
Option value type |
uint64_t
|
|
Option value unit |
bytes
|
|
Default value |
65546
|
|
Applicable socket types |
all, when using VMCI transport
|
ZMQ_VMCI_BUFFER_MIN_SIZE: Retrieve min buffer size of the VMCI socket
The ZMQ_VMCI_BUFFER_MIN_SIZE option shall retrieve the min size of the underlying buffer for the socket. Used during negotiation before the connection is established.
|
Option value type |
uint64_t
|
|
Option value unit |
bytes
|
|
Default value |
128
|
|
Applicable socket types |
all, when using VMCI transport
|
ZMQ_VMCI_BUFFER_MAX_SIZE: Retrieve max buffer size of the VMCI socket
The ZMQ_VMCI_BUFFER_MAX_SIZE option shall retrieve the max size of the underlying buffer for the socket. Used during negotiation before the connection is established.
|
Option value type |
uint64_t
|
|
Option value unit |
bytes
|
|
Default value |
262144
|
|
Applicable socket types |
all, when using VMCI transport
|
ZMQ_VMCI_CONNECT_TIMEOUT: Retrieve connection timeout of the VMCI socket
The ZMQ_VMCI_CONNECT_TIMEOUT option shall retrieve connection timeout for the socket.
|
Option value type |
int
|
|
Option value unit |
milliseconds
|
|
Default value |
-1
|
|
Applicable socket types |
all, when using VMCI transport
|
RETURN VALUE
The zmq_getsockopt() function shall return zero if successful. Otherwise it shall return -1 and set errno to one of the values defined below.
ERRORS
EINVAL
- The requested option option_name is unknown, or the requested option_len or option_value is invalid, or the size of the buffer pointed to by option_value, as specified by option_len, is insufficient for storing the option value.
ETERM
- The 0MQ context associated with the specified socket was terminated.
ENOTSOCK
- The provided socket was invalid.
EINTR
- The operation was interrupted by delivery of a signal.
EXAMPLE
Retrieving the high water mark for outgoing messages.
-
/* Retrieve high water mark into sndhwm */ int sndhwm; size_t sndhwm_size = sizeof (sndhwm); rc = zmq_getsockopt (socket, ZMQ_SNDHWM, &sndhwm, &sndhwm_size); assert (rc == 0);
SEE ALSO
zmq_setsockopt(3) zmq_socket(3) zmq(7)
AUTHORS
This page was written by the 0MQ community. To make a change please read the 0MQ Contribution Policy at m[blue]http://www.zeromq.org/docs:contributingm[].
Index
- NAME
- SYNOPSIS
- DESCRIPTION
-
- ZMQ_AFFINITY: Retrieve I/O thread affinity
- ZMQ_BACKLOG: Retrieve maximum length of the queue of outstanding connections
- ZMQ_CONNECT_TIMEOUT: Retrieve connect() timeout
- ZMQ_CURVE_PUBLICKEY: Retrieve current CURVE public key
- ZMQ_CURVE_SECRETKEY: Retrieve current CURVE secret key
- ZMQ_CURVE_SERVERKEY: Retrieve current CURVE server key
- ZMQ_EVENTS: Retrieve socket event state
- ZMQ_FD: Retrieve file descriptor associated with the socket
- ZMQ_GSSAPI_PLAINTEXT: Retrieve GSSAPI plaintext or encrypted status
- ZMQ_GSSAPI_PRINCIPAL: Retrieve the name of the GSSAPI principal
- ZMQ_GSSAPI_SERVER: Retrieve current GSSAPI server role
- ZMQ_GSSAPI_SERVICE_PRINCIPAL: Retrieve the name of the GSSAPI service principal
- ZMQ_HANDSHAKE_IVL: Retrieve maximum handshake interval
- ZMQ_IDENTITY: Retrieve socket identity
- ZMQ_IMMEDIATE: Retrieve attach-on-connect value
- ZMQ_INVERT_MATCHING: Retrieve inverted filtering status
- ZMQ_IPV4ONLY: Retrieve IPv4-only socket override status
- ZMQ_IPV6: Retrieve IPv6 socket status
- ZMQ_LAST_ENDPOINT: Retrieve the last endpoint set
- ZMQ_LINGER: Retrieve linger period for socket shutdown
- ZMQ_MAXMSGSIZE: Maximum acceptable inbound message size
- ZMQ_MECHANISM: Retrieve current security mechanism
- ZMQ_MULTICAST_HOPS: Maximum network hops for multicast packets
- ZMQ_MULTICAST_MAXTPDU: Maximum transport data unit size for multicast packets
- ZMQ_PLAIN_PASSWORD: Retrieve current password
- ZMQ_PLAIN_SERVER: Retrieve current PLAIN server role
- ZMQ_PLAIN_USERNAME: Retrieve current PLAIN username
- ZMQ_USE_FD: Retrieve the pre-allocated socket file descriptor
- ZMQ_RATE: Retrieve multicast data rate
- ZMQ_RCVBUF: Retrieve kernel receive buffer size
- ZMQ_RCVHWM: Retrieve high water mark for inbound messages
- ZMQ_RCVMORE: More message data parts to follow
- ZMQ_RCVTIMEO: Maximum time before a socket operation returns with EAGAIN
- ZMQ_RECONNECT_IVL: Retrieve reconnection interval
- ZMQ_RECONNECT_IVL_MAX: Retrieve maximum reconnection interval
- ZMQ_RECOVERY_IVL: Get multicast recovery interval
- ZMQ_SNDBUF: Retrieve kernel transmit buffer size
- ZMQ_SNDHWM: Retrieves high water mark for outbound messages
- ZMQ_SNDTIMEO: Maximum time before a socket operation returns with EAGAIN
- ZMQ_SOCKS_PROXY: Retrieve SOCKS5 proxy address
- ZMQ_TCP_KEEPALIVE: Override SO_KEEPALIVE socket option
- ZMQ_TCP_KEEPALIVE_CNT: Override TCP_KEEPCNT socket option
- ZMQ_TCP_KEEPALIVE_IDLE: Override TCP_KEEPIDLE (or TCP_KEEPALIVE on some OS)
- ZMQ_TCP_KEEPALIVE_INTVL: Override TCP_KEEPINTVL socket option
- ZMQ_TCP_MAXRT: Retrieve Max TCP Retransmit Timeout
- ZMQ_THREAD_SAFE: Retrieve socket thread safety
- ZMQ_TOS: Retrieve the Type-of-Service socket override status
- ZMQ_TYPE: Retrieve socket type
- ZMQ_ZAP_DOMAIN: Retrieve RFC 27 authentication domain
- ZMQ_VMCI_BUFFER_SIZE: Retrieve buffer size of the VMCI socket
- ZMQ_VMCI_BUFFER_MIN_SIZE: Retrieve min buffer size of the VMCI socket
- ZMQ_VMCI_BUFFER_MAX_SIZE: Retrieve max buffer size of the VMCI socket
- ZMQ_VMCI_CONNECT_TIMEOUT: Retrieve connection timeout of the VMCI socket
- RETURN VALUE
- ERRORS
- EXAMPLE
- SEE ALSO
- AUTHORS